Mini-vci Driver For Mac
Users got error: unable to Connect to VIM, during connect techstream via mvci to Toyota car models as following picture shows: Obd365 engineer answer: It’s not Xhorse product quality problem, but you need a simple reset, set the area to Europe. Step-by-step to do as follows: 1. Open Techsream software, in the toolbar click “Setup-Techstream conficuration” 2. Area Selection: select “Europe” under the drop list among Japan, North America, Europe and other. Asus f80cr driver for mac.
Default Language Selection 4. Techstream Conficuration: no need input nothing, click OK. Note: if the above solution not work, try these: 1) In the Techstream toolbar, click ” Help- DLC3 Cable Check ” to check your conectivity problems with car.
2) Try to install on another desktop, better with windows XP.
Vci Device Driver
Toyota Mini Vci Driver
Introduction In this tutorial, we’ll show you how to install drivers on multiple operating systems. Although this tutorial was written using Windows 7, Mac OS X 10.6, and Ubuntu 13.04, the process should be very similar, if not exactly the same, for other versions/variations of these operating systems. Suggested Reading Before you begin this tutorial, you should have the Arduino IDE installed on your computer. Check out our tutorial for a step by step guide.
